Direction for use:
- AS DECARBONIZER
- Shake well before using.
- Apply directly to the area to be treated with short pulses.
- If necessary, use the supplied nozzle.
- Allow product to penetrate for 10-15 minutes.
- Remove the injector.
- Repeat if necessary.
- AS GASKET REMOVER
- Protect conveniently spray painted surfaces as product attacks the paint.
- For best results, hold the container upright, at a distance of 20 to 30 cm from the seal area or surface and spray on the board or surface, a thick layer.
- Leave for 10 to 15 minutes to soften the gasket. If silicone gaskets, leave take 30 minutes.
- Remove the gasket with a soft scraper and clean the surface.
- Repeat if necessary