Wynn’s Engine Flush

Code: 51265
wynns-engine-flush

Wynn’s Engine Flush is a highly detergent concentrate, designed to clean all oil lubricating systems prior to oil change.

  • Cleans engines, hydraulic systems, gearboxes and differentials internally.
  • Quickly and efficiently dissolves varnish, sludge and other contaminants from vital engine parts.
  • Prevents contamination of fresh oil by residues left behind.
  • Neutralizes acids.
  • Frees sticking internal engine components by dissolving deposits.
  • Provides extra protection during the treatment.
  • Quietens noisy hydraulic valve lifters by removing deposits.
  • Is compatible with all mineral, synthetic, single and multigrade oils and suitable for regular and low SAPS applications.

£7.99

In Stock
Share (0)
Total: 0 Total: 0 Total: 0

Description

All petrol and diesel engines of vehicles and stationary equipment.
Gearboxes (non-automatic), differentials and reduction cases.

Engines: Add contents of a can Wynn’s ENGINE FLUSH to the used engine oil before the oil change, while the engine is warm. Let idle without load for 20 minutes. While engine is still warm, drain crankcase. Change oil filter and oil. Treats 3 to 6 litres of oil.
Transmissions (manual) and differentials: Add 5 % to the oil. Drive 1 to 8 hours without overcharging. Drain oil and refill.

Additional information

Brand

Application

Related products

  • k-seal
    Additives

    K-Seal Ultimate – Head Gasket Repair

    A unique formula specially developed to permanently repair serious head gasket and porous block problems.

    K-Seal ULTIMATE  Head Gasket Repair is the simple, permanent fix for blown head gaskets, cracked heads and blocks, and porous engine blocks. Guaranteed repair for the life of your engine, or your money back…

    Their unique formula works with all water-cooled engines – there’s no need to drain or flush your cooling system, and it doesn’t matter what kind of antifreeze or coolant you’ve used previously. Simply shake the bottle, pour K-Seal ULTIMATE into your cooling system, and you’re back on the road.

    Just one bottle of K-Seal ULTIMATE is enough to fix blown head gaskets and cracked heads in cars, MPVs and small vans. For larger engines, simply use two bottles.

    (0 reviews)
    £34.99 Add to cart
  • diesel-magic
    Additives

    Comma Diesel Magic

    450ml

    • Concentrated diesel additive rapidly removes harmful deposits
    • Restores lost power and acceleration
    • Increases fuel economy
    • Reduces engine emissions and black sludge
    • Improves cold start performance
    • Helps reduce ‘Diesel knock’ noise
    • Contains cetane improver to boost performance

    The Comma Diesel Magic is designed from  diesel engines that run on diesel fuel. The solution is poured into the petrol tank. The 400ml can treat up to 60 litres of petrol from the highly concentrated solution.

    Not only will the treatment help to remove any harmful deposits on the fuel injector, but also can increase engine performance, fuel economy and reduce emissions from your vehicle. With the treatment working while you drive your car normally; it means no time is wasted in cleaning your fuel injectors.

    (0 reviews)
    £6.49 Add to cart
  • radiator-stop-leak
    Additives

    Wynn’s Radiator Stop Leak

    Wynn’s Radiator Stop Leak is a sealing product to stop small leaks in the cooling system, with anti-corrosive properties.

    • Stops and prevents leakages in the radiator, cooling and heating system.
    • Stops head gasket leaks.
    • Will not harm rubber hoses, gaskets or other system components.
    • Is compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology).
    • Is formulated to avoid clogging of radiator waterways and temperature sensors.
    • Enhanced protection against rust and corrosion.
    (0 reviews)
    £6.99 Add to cart
  • hydraulic-treatment
    Additives

    Wynn’s Hydraulic Valve Lifter Treatment

    For petrol and diesel engines.

    Wynn’s Hydraulic Valve Lifter Treatment is an oil soluble supplement developed to clean away internal engine deposits that create noise and reduce efficiency.

    • Restores efficient working of hydraulic valve lifters.
    • Lubricates and releases sticking valves.
    • Reduces valve train noise.
    • Restores lost power.
    • Is safe for use with catalytic converters and turbochargers.
    • Is 100 % oil soluble.
    • Contains no solid particles.
    • Is compatible with mineral and synthetic engine oils and suitable for regular and low SAPS applications.
    (0 reviews)
    £11.99 Add to cart